Oil-free Rotary Screw Compressors
Efficient and energy-efficient: Designed with two-stage compression, our two-stage oil-free screw air compressors can more effectively utilize energy than a single-stage air compressor does.
Classify:
Key words:
Oil-free Rotary Screw Compressors
- Features
- Specification
-
Features
About performance
Efficient and energy-efficient: Designed with two-stage compression, our two-stage oil-free screw air compressors can more effectively utilize energy than a single-stage air compressor does. Under the same power input, more compressed air can be outputted and the operating cost is lowered accordingly.
Stable pressure: Our two-stage oil-free screw air compressors can output pressure steadily and continuously. Even under a high working load, the outputted pressure hardly fluctuates. This ensures the stability of the production process.About air quality
Oil-free and clean: Thanks to a special oil-free design, the compressed air contains no oil. In this way, the air purity can be guaranteed. For food processing, pharmaceutical, and electronics industries, etc. with strict air quality requirements, air purity is critical, and ensuring air purity can avoid product quality problems caused by oil contamination.
About reliability
High durability: Internal key components such as the screw are made from high-quality wear-resistant materials. Through precision machining and strict quality inspection, our products are highly durable. Therefore, the maintenance and replacement frequency of devices can be reduced.
Stable operation: The advanced two-stage screw technology result in little vibration and steady operation of air compressors during their running. This may lower the possibility of equipment failure caused by mechanical vibration.About maintenance
Simple and convenient maintenance: The reasonable overall structural design makes it convenient for daily maintenance. For example, routine maintenance procedures such as separator element replacement become simpler, faster, and more convenient, which may save time and human costs.
-
Technical Data Sheet
Product
Model
QLB220-OF-V-G-W-10
Rated Pressure
1.0Mpa
Transmission Mode
Direct Connection
Cooling Method
Water-cooling
Noise Value@7M
≤75DB（A）
Weight
≈6775KG
Size
3800×2080×2552（MM）
Compressor
Model
DGT160G1（3 .818）
Rated Exhaust Pressure
10.5Mpa
Rated Capacity
36.0m³/Min
Shaft Power
243.7KW
Intake Pressure
1atm
Intake Humidity
≤90%R.H.
Motor
Model
JPM315M3250-220
Rated Power
220KW
Type
Permanent Magnet Synchronous
Rated Voltage
380V
Number of Magnetic Pole Pairs
8
Rated Frequency
216.7HZ
Cooling Method:
Air-cooling
Protection Level
IP55
Lubricating
System
Inlet Water Pressure
≥4＜5bar
Inlet Water Volume
40T/H
Oil Pump Model
MDK80RF-100L2-4-3-R
Oil Pump Elastomer Model
GR24
Oil Filter Model
P560693*1 HD133000F*1
Pressure Sensor Brand
Danfoss
Electrical System
Control Module Brand
MAM6090
Frequency Converter Model
SK190028043
Air Intake and Exhaust System
Intake Valve Model
GZ-200AF
Air Filter Element Model
P777868
Solenoid Valve Model
ODE
Primary Safety Valve Model
A28X-16T-DN50/0.35
Coupling Elastomer Block Model
GR90
Exhaust Check Valve Model
H71W-16RS80
Application cases
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Advantage
Application description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Factory description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Shipping Packaging
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Why Choose Us?
1)The products can be made completely according to the customer's requirements, and we have our own factory. 2)High quality product and good price. 3)Good Pre-sale、on sale and after sales service. 4)Short delivery time. 5)Exported all over the world, with rich experience.
FAQ
Q：I want a specific size or color. Can I get my color coated steel customized?
Yes. Customization is available. You can choose the color or pattern, size (length, width, thickness, weight, etc.), paints, shape, etc. We offer coils and sheets, as well as further processing services, such as logo printing, etc. Please send us your requirements, we will meet your requirements.
Q: Are we a trader or a manufacturer?
A: We are a manufacturer and have our own factory.
Q: How to pack?
A: Can be packaged according to customer's needs
Q: How long is your delivery time?
A: If the goods are in stock, generally about 25-30days if the goods are not in stock, according to the quantity.
Related Products
Jackson.
Fier.
Rachel.
jackson@szqlb.com
Rachel@szqlb.com
Fier@szqlb.com
Rachel
Fier
Jackson
+86 13926580519
+86 13923880529
+86 13205790180
Airboss Energy-Saving Tech
Chat Us Anytime
