Heatless regenerative adsorption dryer (low PDP models for option)
Stable dew point at outlet, and multiple dew point temperatures are available for selection (-20℃, -40℃, -70℃ optional).
Classify:
Key words:
Heatless regenerative adsorption dryer
- Features
- Specification
-
Feature
1.Stable dew point at outlet, and multiple dew point temperatures are available for selection (-20℃, -40℃, -70℃ optional).
2.All valve series adopt first-tier brands. They have passed 100,000 times of extreme trouble-free testing and 50,000 times of leak-free testing. Big brands are more trustworthy.
3.The whole series of adsorbents adopt international first-tier brands. They have high adsorption efficiency, are durable, and big brands are more trustworthy.
4.The whole series of products have ultra-low pressure drop. The specially designed cyclone diffusion device enlarges the flow passage. Full-flow valves. The pressure loss of blast zero air consumption can be as low as 0.01 MPa. The pressure loss of compressed heat zero air consumption can be as low as 0.02 MPa.
5.The whole series of products have ultra-low energy consumption. The heater adopts a multi-module micro-heating mode for constant temperature output, with lower energy consumption and no redundant energy waste. Intelligent regeneration is adopted. The system judges the completion of regeneration by itself without wasting a bit of energy. Intelligent dew point control and dew point standby achieve ultimate energy saving.
6.Multiple controllers are available for selection: text screen + PLC, touch screen + PLC. They support the MODBUD communication protocol and RS485 interface and support the DCS system.
7.Rich expandable functions are available for selection: dew point energy-saving control, interlocking start-stop, remote start-stop, pressure monitoring, temperature monitoring, outlet dew point monitoring, heating temperature display, and alarm function.
8.The whole series of products come with a two-year warranty and can be extended to five years. -
Main technical parameters
Model
Capacity
Dimension(mm)Size Of Inlet&Outlet
Weight
Fliter
Nm/min
L
W
H
KG
Pre-Fliter
Fliten
JHD-003
3.8
1000
550
1550
G1”
180
T-004
A-004
T-004
JHD-004
4.8
1000
550
1700
G1z”
270
T-004
A-004
T-004
JHD-006
6.5
1000
550
1860
G1%”
320
T-007
A-007
T-007
JHD-008
8.5
1060
600
2100
G2"
410
T-010
A-010
T-010
JHD-010
11.5
1060
600
2250
G2"
450
T-010
A-010
T-010
JHD-013
14
1250
650
2150
G2”
600
T-013
A-013
T-013
JHD-015
18
1300
800
2150
DN65
700
T-015
A-015
T-015
JHD-020
23
1400
850
2250
DN80
880
T-020L
A-0201
T-020L
JHD-025
28
1400
850
2500
DN80
1060
T-030L
A-030L
T-030L
JHD-030
33
1500
850
2500
DN80
1150
T-030L
A-030L
T-030L
JHD-040
45
1750
950
2500
DN100
1600
T-040L
A-040L
T-040L
JHD-050
55
1800
1000
2600
DN125
1900
T-060L
A-060L
T-060L
JHD-060
65
2000
1100
2680
DN125
2200
T-060L
A-060L
T-060L
JHD-080
88
2100
1200
3100
DN150
2500
T-080L
A-080L
T-080L
JHD-100
110
2200
1300
3150
DN150
3400
T-100L
A-100L
T-100L
Application cases
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Advantage
Application description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Factory description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Shipping Packaging
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Why Choose Us?
1)The products can be made completely according to the customer's requirements, and we have our own factory. 2)High quality product and good price. 3)Good Pre-sale、on sale and after sales service. 4)Short delivery time. 5)Exported all over the world, with rich experience.
FAQ
Q：I want a specific size or color. Can I get my color coated steel customized?
Yes. Customization is available. You can choose the color or pattern, size (length, width, thickness, weight, etc.), paints, shape, etc. We offer coils and sheets, as well as further processing services, such as logo printing, etc. Please send us your requirements, we will meet your requirements.
Q: Are we a trader or a manufacturer?
A: We are a manufacturer and have our own factory.
Q: How to pack?
A: Can be packaged according to customer's needs
Q: How long is your delivery time?
A: If the goods are in stock, generally about 25-30days if the goods are not in stock, according to the quantity.
Related Products
Jackson.
Fier.
Rachel.
jackson@szqlb.com
Rachel@szqlb.com
Fier@szqlb.com
Rachel
Fier
Jackson
+86 13926580519
+86 13923880529
+86 13205790180
Airboss Energy-Saving Tech
Chat Us Anytime
