Filters
In the compressed air purification system, AIRBOSS filters can effectively remove impurities, oil stains, water and odors to reach the highest purification level and help enterprises reduce costs.
Classify:
Key words:
Filters
- Features
- Specification
-
Feature
In the compressed air purification system, AIRBOSS filters can effectively remove impurities, oil stains, water and odors to reach the highest purification level and help enterprises reduce costs. Filtering with precision filters and air-water separators is the best solution for high production efficiency.
The AIRBOSS series of precision filters are divided into five basic specifications of C, T, A, AA, and H according to different filtration performances. The rated air handling capacity is 1.5 - 540 Nm/min. -
Specifications
Products
Performance and use
C
Main pipeline filter
Mostly used after air compressors and rear coolers or before refrigerated dryers. It can filter out a large amount of liquid and solid particles above 3 microns, achieving a minimum residual oil content of only 5 ppm.
T
Air pipeline filter
Mostly used for tools, machinery, motors, cylinders and other equipment and before grade A filters or after adsorption dryers. It can filter out liquid and solid particles as small as 1 micron, achieving a minimum residual oil content of only 0.5 ppm.
A
High-efficiency oil removal filter
Mostly used upstream of adsorption dryers or downstream of refrigerated dryers. It can filter out liquid and solid particles as small as 0.01 micron, achieving a minimum residual oil content of only 0.001 ppm. Remember to install a grade T air pipeline filter upstream to protect it.
AA
Ultra-high-efficiency oil removal filter
Downstream of refrigerated dryers, it can filter out liquid and solid particles as small as 0.01 micron, achieving a minimum residual oil content of only 0.001 ppm. Remember to install a grade A high-efficiency oil removal filter upstream to protect it.
H
Activated carbon micro-oil mist filter
Mostly used to purify food, drugs, and breathing gases. It can filter out oil mist and hydrocarbons as small as 0.01 micron, achieving a minimum residual oil content of only 0.003 ppm. Remember to install a grade A ultra-high-efficiency oil removal filter upstream to protect it.
Technical Parameters
Range
Model
Air Flow Nmi/min
Inlet And Outlet Diameter
Dimension
Weight
Filter Element
A
B
C
D
Kg
Model
Quantity
JF range
001
1.8
Rc1"
107
270
84
1
(level)-001E
1
002
2.6
Rc1"
107
315
84
1.5
(level)-002E
1
004
6.0
Rc1-1/2"
135
435
103
3.5
(level)-004E
1
007
8.5
Rc1-1/2"
135
(level)-007E
1
010
11.5
Rc2"
135
555
103
4
(level)-010E
1
013
14.8
Rc2"
170
735
130
8
(level)-013E
1
015
18.0
Rc2-1/2"
170
905
130
10
(level)-022E
1
020
24.5
Rc2-1/2"
170
1035
130
11
(level)-026E
1
JL range
020L
24.5
DN80
350
820
1055
159
45
(level)-020E
1
030L
35.0
DN80
350
820
1055
159
70
(level)-030E
1
040L
45.0
DN100
430
875
1100
219
75
(level)-030E
2
060L
65.0
DN125
450
915
1210
273
80
(level)-030E
3
080L
90.0
DN150
580
955
1270
325
142
(level)-030E
4
100L
110.0
DN150
600
955
1310
377
145
(level)-030E
5
120L
130.0
DN150
600
985
1380
457
150
(level)-030E
6
150L
180.0
DN200
650
1020
1460
457
228
(level)-030E
7
200L
230.0
DN200
700
1060
1520
530
230
(level)-030E
8
250L
280.0
DN250
700
1060
1520
530
297
(level)-030E
10
300L
350.0
DN250
750
1580
1580
630
418
(level)-030E
14
400L
460.0
DN300
850
1160
1710
711
419
(level)-030E
18
500l
580.0
DN300
950
1200
1850
813
420
(level)-030E
21
Notes:
The items listed in the table are all standard specifications. Special custom-made products or additional optional equipment are not limited to this.
The specifications listed in the table can all be matched with JIAMEI automatic drainers and differential pressure indicators.
The standard air handling flow is based on an inlet pressure of 0.7 MPa.
For filters with an air handling flow greater than 580 Nm/min, please contact us.
Application cases
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Advantage
Application description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Factory description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Shipping Packaging
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Why Choose Us?
1)The products can be made completely according to the customer's requirements, and we have our own factory. 2)High quality product and good price. 3)Good Pre-sale、on sale and after sales service. 4)Short delivery time. 5)Exported all over the world, with rich experience.
FAQ
Q：I want a specific size or color. Can I get my color coated steel customized?
Yes. Customization is available. You can choose the color or pattern, size (length, width, thickness, weight, etc.), paints, shape, etc. We offer coils and sheets, as well as further processing services, such as logo printing, etc. Please send us your requirements, we will meet your requirements.
Q: Are we a trader or a manufacturer?
A: We are a manufacturer and have our own factory.
Q: How to pack?
A: Can be packaged according to customer's needs
Q: How long is your delivery time?
A: If the goods are in stock, generally about 25-30days if the goods are not in stock, according to the quantity.
Related Products
Jackson.
Fier.
Rachel.
jackson@szqlb.com
Rachel@szqlb.com
Fier@szqlb.com
Rachel
Fier
Jackson
+86 13926580519
+86 13923880529
+86 13205790180
Airboss Energy-Saving Tech
Chat Us Anytime
