Air Tank
AIRBOSS air tanks are made of rolled steel selected from large steel mills in China. The strength, toughness, hardness, and compositions of such rolled steel are all above national standards.
Classify:
Key words:
Air Tank
- Features
- Specification
-
Feature
• Energy storage (for standby)
• Air pressure stabilization
• To mitigate the impact of impulses on equipment consuming the compressed air.
• To precipitate moisture, grease dirt, and dust in the air
• To improve the continuity and stability of the air outputted from the air compressor.
• To reduce the frequency of starting the compressor and thus extend its service life.Advantages & features
• Material selection process
AIRBOSS air tanks are made of rolled steel selected from large steel mills in China. The strength, toughness, hardness, and compositions of such rolled steel are all above national standards.
• Welding process
Thanks to automatic welding equipment with high operating efficiency, weld joints are flat and the lines are clear.
• Spraying process
For corrosion and rust prevention and durability, antirust paint is sprayed exteriorly, while epoxy resin and others are selected for interior walls based on the practical application scenarios of products.
• Sand-blasting process
A large-sized sandblast device is used to achieve uniformly processed tank surfaces and glossy tank bodies.
• Detection process
An advanced detection device is used to perform flaw detection, hydrostatic testing and 100% non-destructive testing for all butt welds on the tank body. All products have passed the ISO9001 certification.
-
Number
Volume/operating pressure
Temperature
Total height
Inlet
Outlet
Base
Drain valve
Wall thickness
Supporting air compressor
H1
Nominal diameter
Threads
H2
Nominal diameter
Threads
∅1
d
mm Capacity （m³/min)
1
0.3m³/0.8Mpa
100
1614
550
667
50
Rp1½"
1217
50
Rp1½"
400
20
R½"
4
2.5-3
2
0.3m³/1.0Mpa
1616
5
3
0.3m³/1.3Mpa
110
1628
669
1219
6
4
0.5m³/0.8Mpa
100
2050
600
680
50
Rp1½"
1630
50
Rp1½"
420
20
R½"
5
4-5
5
0.5m³/1.0Mpa
2102
5
6
0.5m³/1.3Mpa
110
2076
681
1681
6
7
0.6m³/0.8Mpa
100
2078
650
693
65
Rp1½"
1643
65
Rp1½"
470
20
R½"
5
4.8-6
8
0.6m³/1.0Mpa
2142
694
1644
6
9
0.6m³/1.3Mpa
110
2325
695
1705
7
10
1m³/0.8Mpa
100
2327
800
800
65
Rp1½"
1840
65
Rp1½"
560
25
R½"
5
8-10
11
1m³/1.0Mpa
2404
6
12
1m³/1.3Mpa
110
2574
1920
5
13
1.5m³/0.8Mpa
110
2575
950
767
65
Rp2"
2067
65
Rp2"
670
25
R½"
5
12-15
14
1.5m³/1.0Mpa
2578
768
5
15
1.5m³/1.3Mpa
2810
769
2069
6
16
2m³/0.8Mpa
110
2810
1000
780
80
Rp2"
2280
80
Rp2"
700
24
R½"
5
16-20
17
2m³/1.0Mpa
5
18
2m³/1.3Mpa
6
19
2m³/0.8Mpa
110
2752
1200
880
80
2180
80
840
24
R½"
5
20-25
20
2.5m³/1.0Mpa
881
2181
6
21
2.5m³/1.3Mpa
2754
882
2182
7
22
3m³/0.8Mpa
110
2800
1300
905
80
2205
80
950
24
R½"
5
24-30
23
3m³/1.0Mpa
2802
906
2206
6
24
3m³/1.3Mpa
2804
907
2207
7
25
4m³/0.8Mpa
110
3060
1400
930
100
2430
100
1050
24
R½"
6
32-40
26
4m³/1.0Mpa
3062
931
2431
7
27
4m³/1.3Mpa
3066
932
2432
8
28
5m³/0.8Mpa
110
3752
1400
931
100
3131
100
1050
24
R½"
6
40-50
29
5m³/1.0Mpa
3132
7
30
5m³/1.3Mpa
3756
932
3133
8
Application cases
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Oil Injected Rotary Screw Compressors
Advantage
Application description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Factory description
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Shipping Packaging
Rebar is the common name for hot rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar is composed of HRB and the minimum yield point of the grade. H, R, and B are the first letters of the three words Hotrolled, Ribbed, and Bars respectively. Hot-rolled ribbed steel bars are divided into three grades: Grade II HRB335 (the old grade is 20MnSi), Grade III HRB400 (the old grades are 20MnSiV, 20MnSiNb, 20Mnti), and Grade IV HRB500.
Why Choose Us?
1)The products can be made completely according to the customer's requirements, and we have our own factory. 2)High quality product and good price. 3)Good Pre-sale、on sale and after sales service. 4)Short delivery time. 5)Exported all over the world, with rich experience.
FAQ
Q：I want a specific size or color. Can I get my color coated steel customized?
Yes. Customization is available. You can choose the color or pattern, size (length, width, thickness, weight, etc.), paints, shape, etc. We offer coils and sheets, as well as further processing services, such as logo printing, etc. Please send us your requirements, we will meet your requirements.
Q: Are we a trader or a manufacturer?
A: We are a manufacturer and have our own factory.
Q: How to pack?
A: Can be packaged according to customer's needs
Q: How long is your delivery time?
A: If the goods are in stock, generally about 25-30days if the goods are not in stock, according to the quantity.
Related Products
Jackson.
Fier.
Rachel.
jackson@szqlb.com
Rachel@szqlb.com
Fier@szqlb.com
Rachel
Fier
Jackson
+86 13926580519
+86 13923880529
+86 13205790180
Airboss Energy-Saving Tech
Chat Us Anytime
